Enterprise5 Downloads Home
Enterprise5 - PC-Based Radiology Dictation System Preparation Guide
Print This Page
 
 
  • All steps should be completed in the specific order as outlined in the following instructions
   
 
  • Failure to follow all steps will result in the user being unable to access Enterprise5 correctly
   
 
  • Please Contact the Nuance Enterprise5 Support Team at 877-932-6339 for questions regarding the preparation or installation process
 
Quick Steps:
 
1. Perform the Enterprise5 - Standard User and Base Preparation Installation
   
2. Connect the Philips USB Speechmike to the workstation
   
3. Install the specific "Philips Speechmike Drivers" that are also available on the Enterprise5 Downloads Home page
  - Use these drivers for Phillips Speechmike 2 Only - For Speechmike 3 utilize the included "Speechmike Control Center"
   
4. Set specific Speechmike settings within Windows
   
 
 
Detailed Steps:
   
  About the Enterprise5 PC-Based Radiology Dictation System   
 
   
a. This preparation is a prerequisite in order to access the PC-Based Radiology Dictation System functionality
b. Only required if Client users are enabled for the PC-Based Radiology Dictation System functionality
c. If unsure Please Contact the Nuance Enterprise5 Support Team
   
   
1. Perform the Enterprise5 - Standard User and Base Preparation Installation
   
2. Connect Phillips Speechmike to workstation (please refer to the Enterprise5 - Workstation Software and Hardware Specifications)
   
3. Install the specific "Philips Speechmike Drivers" that are also available on the Enterprise5 Downloads Home page
 
- Use these drivers for Phillips Speechmike 2 Only - For Speechmike 3 utilize the included "Speechmike Control Center"
a. After downloading and saving the drivers, run the driver installation file
b. Select "Custom" install and choose the drivers only; the utility software is not needed
   
4. Set specific Speechmike settings within Windows:
 
a. From Windows access the "Sounds and Audio Devices" in the Windows Control panel to setup recording and playback
 
- Select the Audio tab and set the Sound Playback device to the sound card on the workstation
- Playback MUST be routed through the PC speakers and NOT the Speechmike
- Routing through the Speechmike will cause issues with the playback and playback controls on the device
- Set the Sound recording device to the USB audio device (the Speechmike)
 
Preparation is now complete
 
Revision: 03/11/2012 Questions? - Please Contact the Nuance Enterprise5 Support Team - 877-932-6339 Revision: 03/11/2012